Home

0-10V Dimmer Electronic Potentiometer for 1-10V Dimmable LED Driver

Classification:

The Installation must be carrierd out by an electrical specialist in accordance with international and nationa standards. The max.load connected to the drive is 10V/40mA Designed for 1-10V regulating and Compatible all 0/1-10V interface dimmable electronic LED Driver &ballasts & transformers and power dimmers. Place the driver away from direct heat sources and in well-aired spaces.If the driver is built-in,sufficient ventilation must be ensured. Minimum output connect cable size is 1007#20AWG; Maximum output cable length:50M. When connecting the electronis LED Driver &ballasts & transformers and power dimmers,careful attention should be paid to connecting"+"and "-"as showing as the below wiring diagram.

Message

Spec Sheet

Product Specification

Model No.		EC013
Input	Voltage (Max.)	10 V DC
	Voltage (Min.)	0.5
Output	Control Current (Max.)	40 mA
Environment	Working Temp.	- 10 ℃~ 40 ℃ambient operating at full load (Refer to output load derating curve)
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.,Humidity	-20 ~ +80℃ ,10% ~ 90% RH
Safety & EMC	Safety Standards	meet EN61347-1,EN61347-2-13
	EMC Standards note.3	meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547
Connection	Input	1 P screw terminal block for "Dim+",1 P screw terminal block for "Dim-"
Others	MTBF	50K hours min. @Tcase=75 ℃ or 100K hours min. @Tcase=65 ℃
	Dimension(LWH)	86 * 86 * 50 mm
	Packing(LWH)/Carton	490 * 400 * 270 mm; 100 pcs/ 8.0 Kg

Key words:

0-10V Dimmer Electronic Potentiometer for 1-10V Dimmable LED Driver

None

0-10V Dimmer Electronic Potentiometer for 0 / 1-10V Dimmable LED Driver

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible