Home

0-10V Dimmer Electronic Potentiometer for 0 / 1-10V Dimmable LED Driver

Classification:

The Installation must be carrierd out by an electrical specialist in accordance with international and nationa standards. The max.load connected to the drive is 10V/40mA Designed for 1-10V regulating and Compatible all 0/1-10V interface dimmable electronic LED Driver &ballasts & transformers and power dimmers. Place the driver away from direct heat sources and in well-aired spaces.If the driver is built-in,sufficient ventilation must be ensured. Minimum output connect cable size is 1007#20AWG; Maximum output cable length:50M. When connecting the electronis LED Driver &ballasts & transformers and power dimmers,careful attention should be paid to connecting"+"and "-"as showing as the below wiring diagram.

Message

Spec Sheet

Product Specification

Model No.		EC011
Input	Voltage (Max.)	10VDC
Input	Voltage (Min.)	0.5VDC
Output	Control Current (Max.)	40mA
Environment	Working Temp	-10℃~40℃ambient operating at full load
	Working Humidity	20%～90%RH non-condensing
	Storage Temp.,Humidity	-20～+80℃,10%～90%RH
Connection	To Dimmable Input port	UL rated,20AWGx 2C(150 mm)for "Dim+"and "Dim-"
Others	MTBF	100K hours min.@Ta=25℃
	Dimension(LWH)	322035.5mm
	Packing(LWH)/Carton	270260180mm;100pcs/4.6Kg

Key words:

0-10V Dimmer Electronic Potentiometer for 0 / 1-10V Dimmable LED Driver

0-10V Dimmer Electronic Potentiometer for 1-10V Dimmable LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible