100W AC-DC Constant Voltage LED Driver with 0-10V Dimming
Classification:
Universal Input range form 100 to 304VAC, 50/60Hz Fully Potted suitable for dry and damp location applications . Built-in active PFC Function Constant Voltage design (C .V mode) 0-10V Dimming Control UL8750 and CE compliant Protections: ■Over current/ ■ Short Circuit / ■ Over Temperature . 3 years warranty

Product Specification
|
Model No. |
LD100H-U24-Q2-LP |
LD100H-U24-Q2-SS |
LD100H-U24-Q2-SG |
|
|
Output |
DC Voltage |
24V |
||
|
|
Voltage Tolerance |
’-3%~3% |
||
|
|
Current Range |
4.2A |
||
|
|
Rated Power |
100W |
||
|
|
Ripple & Noise (Max.) N |
3.0 Vp-p |
||
|
|
Efficiency note.1 |
>85% |
||
|
Input |
Voltage Range |
100~304VAC |
||
|
|
Rated Voltage |
110 - 277 V AC |
||
|
|
Frequency Range |
47~63Hz |
||
|
|
AC Current (Max.) |
0.45 A at 240VAC |
||
|
|
Power Factor |
> 0.93 at 240VAC with full load. |
||
|
|
Inrush Current (Max.) |
COLD START 30 A at 240 VAC |
||
|
|
Leakage Current |
< 3 mA / 240 VAC |
||
|
Protections |
Over Current |
100 % - 120 % Constant current limiting, auto-recovery |
||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||
|
Environment |
Working Temp. |
-10 ℃~ 40 ℃ambient operating at full load |
||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
||
|
|
Storage Temp.,Humidity |
-20 ~ +80℃ ,10% ~ 90% RH |
||
|
Safety & EMC |
Safety Standards |
meet EN61347-1,EN61347-2-13 ,UL8750 |
||
|
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547 |
||
|
|
Withstand Voltage |
I/P - O/P: 1.25 K VAC |
||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
||
|
Connection |
Input |
UL 1015, 18 AWG WHITE BLACK GRN/YLW, L= 165mm |
UL 1015, 18 AWG WHITE BLACK GRN/YLW,L= 165mm |
UL 1015, 18 AWG WHITE BLACK GRN/YLW,L= 165mm |
|
|
Output |
UL 1015,18 AWG RED/BLACK for Vo+/Vo- ,L=165mm; UL1007, 20AGW Purple/Gray for DIM+/ DIM-,L=165mm |
UL 1015,18 AWG RED/BLACK for Vo+/Vo-,L=165mm; UL1007, 20AGW Purple/Gray for DIM+/ DIM-,L=165mm |
UL 1015, 18 SJTW(BLACK) 4C,1015 20 AGW RED/BLACK for Vo+/Vo-; Purple/Gray for DIM+/ DIM-, L= 318 mm |
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
||
|
|
Dimension(L*W*H) |
314 (278) * 64 * 40 mm |
165 * 64 * 40 mm |
201 (165) * 64 * 40 mm |
|
|
Packing(L*W*H)/Carton |
345 * 270 * 240mm; 15Kg |
377* 365 * 135mm; 15Kg |
350 * 290 * 290mm; 14Kg |
|
Note |
1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives. |
|||
Key words:
100W AC-DC Constant Voltage LED Driver with 0-10V Dimming
Previous Page
Next Page
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products