100W AC-DC Constant Voltage LED Driver
Classification:
Universal AC input range 90~305VAC Constant Voltage Operation Buit-in Active PFC Function Protections:OVP/OCP/SCP/OTP High Efficiency 93% Fully Insulated Case with IP67 Level Cooling by Free Air Convection(Metal Housing) ■No Load Consumption<0.5W at 230Vac Suitable for LED Strips and Moving Sign Applications ■ Function options:3 in 1 dimming(dim-to-off);DALI The output and dimming lines are compliant with the new regulations with isolation.

Product Specification
|
Model No. |
LD100H-VU83012-70(X) |
LD100H-VU42024-70(X) |
LD100H-VU28036-70(X) |
LD100H-VU21048-70(X) |
|||
|
OUTPUT |
DC Voltage |
12V |
24V |
36V |
48V |
||
|
|
Rated Current |
8.3A |
4.2A |
2.8A |
2.1A |
||
|
|
Current Range |
0~8.3A |
0~4.2A |
0~2.8A |
0~2.1A |
||
|
|
Rated Power |
99.6W |
100.8W |
100.8W |
100.8W |
||
|
|
Ripple&Noise(Max.)Note.2 |
300mVp-p |
350mVp-p |
400mVp-F |
500mVp-p |
||
|
|
Efficiency at 230VAC(Typ.) |
93% |
93% |
93% |
93% |
||
|
|
Voltage Tolerance Note.3 |
±5% |
±5% |
±5% |
±5% |
||
|
|
PWM Dimming (optional) |
>1600 Hz (for dimmable version) |
|||||
|
|
Setup Time (Max.)Note.6 |
0.5s/230VAC,1s/115VAC,at full load |
|||||
|
INPUT |
Rated Voltage Note.4 |
100~277VAC |
|||||
|
|
Voltage Range |
90~305VAC |
|||||
|
|
Frequency Range |
47-63Hz |
|||||
|
|
AC Current(Max) |
1.5A at 115VAC/0.6A at 230VAC |
|||||
|
|
Power Factor |
>0.98 at 115VAC/>0.94 at 230VAC at full load.PF=0.9 at 70%load |
|||||
|
|
Total Harmonic Distortion |
THD<15%at 230VAC,full load Note 9. |
|||||
|
|
Inrush Current(Max) |
Cold Start 60A at 230VAC |
|||||
|
|
Leakage Current |
<1mA/240Vac |
|||||
|
DIM.Control (3 in 1) |
DC dimming |
DC 0-10V |
|||||
|
|
PWM dimming |
Puls:Hi=10V Low=0V,Duty:0%~100%,Fsw 0.5-3KHz |
|||||
|
|
Resistance dimming |
0KQ~100KQ or Electronic Potentiometer 0-10V |
|||||
|
DIM.Control (DALI) |
DALI Standards |
Compatibility with IEC 62386-101,102 and 207 |
|||||
|
|
DALI bus current consumption |
<2mA |
|||||
|
Protections |
Over Current |
105%-180%rated output power |
|||||
|
|
|
Type:Auto recover after fault condition disappeared |
|||||
|
|
Short Circuit |
Type:Hiccup mode &recovers after fault condition disappeared. |
|||||
|
|
Over Voltage |
13~19V |
26~38V |
38V~50V |
50V~65V |
||
|
|
|
Type:Hiccup mode (re-power on to recover). |
|||||
|
|
Over Temperature |
Tcase:95°℃±10% |
|||||
|
|
|
Type:Shutdown mode (re-power on to recover). |
|||||
|
Model No. |
LD100H-VU83012-70(X) LD100H-VU42024-70(X) LD100H-VU28036-70(X) LD100H-VU21048-70(X) |
|
|
Environment |
Working Temp |
-30℃~50℃(Refer to "Derating Curve") |
|
|
Working Humidity |
20%~90%RH non-condensing. |
|
|
Storage Temp.,Humidity |
-40~+80℃,10%~90%RH |
|
|
Vibration |
10~500 Hz,2G 10 min./1 cycle,period for 60 min.each along X,Y,Z axes. |
|
Safety&EMC |
Safety Standards |
EN61347-1,EN61347-2-13,independent,IP67 Approved |
|
|
Withstand Voltage |
I/P-O/P:3.75KVACI/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|
|
Isolation Resistance |
l/P-O/P,I/P-FG,O/P-FG:100M ohms /500VDC at 25°C |
|
|
FMC.Emission |
Compliance to EN55015,FCC part 15 |
|
|
Harmonic Current |
Compliance to EN61000-3-2 Class C(=75%load),EN61000-3-3 |
|
|
EMS Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547,criteria B |
|
Others |
MTBF |
120K hours min. MIL-HDBK-217F(25°C) |
|
|
Dimension(L*W*H) |
230x 80.3×33.5 mm;840g/pcs |
|
1.All parameters NOT specially mentioned are measured at 230V AC input,rated load and 25°C ambient temperature. Note 2.Ripple &Noise are measured at 20MHZ of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor 3.Tolerance:includes set up tolerance,line regulation and load regulation. 4.Derating may be needed under low input voltage.Please check the static characteristics for more details 5.The power supply is considered as a component that will be operated in combination with final equipment.Since EMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installation again 6.Length of set up time is measured at first cold start.Turning ON/OFF the power supply may lead to increase of the set up time. 7.The unit might not be suitable for lighting applications in EU countries.Please check with your local authorities for the possible use of the unit. 8.Suitable for indoor use or outdoor use without direct sunlight exposure 9.THD<25%at 264VAC,full load |
||
Key words:
100W AC-DC Constant Voltage LED Driver
Next Page
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products