Home

36W AC-DC Constant Voltage LED Driver

Classification:

AC input range from 90 to 264Vac Constant voltage mode Ac甘ve PFC design Class 2 Power Supply Unit Fully Isolated Plas甘c Case No-load power consump甘on <0.5W at 230Vac Set up 甘me < 0.5S at 230Vac Compliant with ErP (EU) 2019/2020 Compliant with CE cer甘ﬁcate by LED driver product segment Safety protec甘ons include OCP/SCP/OVP/OTP

Message

Spec Sheet

Product Specification

Moded No.		LD036H-VU30012-03P-T	LD036H-VU15024-03P-T
Output	DC Voltage	12V	24V
	Current Range	0~3.0A	0~1.5A
	Rated Max. Power	36W	36W
	Voltage Tolerance	±5%	±5%
	Ripple & Noise (Max.) note.2	0.18Vp-p	0.24Vp-p
	Efficiency note .1 full load(230V/50HZ)	≥83%	≥85%
	Max Input Power@ No Load	<0.5W@Vin_ac=230V
	Setup Time	≤500ms @ 230Vac & full load
	Hold up Time (Typ.)	≥20ms @ 230Vac & full load
Input	Voltage Range	100-240Vac
	Frequency Range	50/60 Hz
	AC Current (Max.)	0.7A at 115Vac / 0.38A at 230Vac
	Power Factor	> 0.9 at 115Vac / >0.45 at 230Vac with full load.
	Inrush Current (Max.)	50A
	Leakage Current	< 1mA / 240Vac
Protections	Over Current	110% - 150% Rated max output current.
	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed
	Over Temperature	Shut down output, recovers automatically after temperature goes down.
	Over Voltage	110% - 150% Rated output voltage
Environment	Operating Temp.	-10℃ ~ 40℃ (Refer to output load derating curve)
	Operating Humidity	20% ~ 90% RH non-condensing.
	Storage Temp & Humidity	-40 ~ +80℃, 10% ~ 90% RH
Safety&EMC	Safety Standards	EN61347 -1, EN61347 -2 -13
	Withstand Voltage	I/P - O/P : 3.75KV AC
	Isolation Resistance	I/P - O/P : 100M ohms / 500VDC at 25℃
	EMI Conduction & Radiation	Meet EN55015
	EMS Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547, EN61000 -3 -2 Class C
Connection	Input	PA001 2P Screw terminal
	Output	PA001 2P Screw terminal
Others	MTBF	100K hours min. MIL -HDBK -217F(25℃)
	Dimension(LWH)	96x44.3x30 mm
	Packing(LWH)/Carton	467x255x185 mm
Note 1. All parameters NOT specially mentioned are measured at 230V/50 Hz AC input, rated load and 25°C ambient temperature. 2.Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply as a component which will be installed in a final equipment,and the EMI performance must be re-confirmed.

Key words:

36W AC-DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible