3-10W AC-DC Constant Voltage LED Driver
Classification:
Universal AC input /Full range(up to 264 VAC) Constant Voltage design Class 2 Power Supply Unit Fully isolated plastic case 2 years warranty Protections: Short Circuit / Over Temperature

Product Specification
|
Model No |
LD-PI2512AF |
LD-PI5012AF |
LD-PI8312AF |
LD-PI1224AF |
LD-PI2524AF |
LD-PI4124AF |
|
|
Input |
Voltage &Frequency Range |
100-240VAC;50Hz/60Hz |
|||||
|
AC Current (Max.) |
0.19A at 115Vac/0.12A at 230Vac |
||||||
|
Power Factor |
>0.56 at 115Vac/>0.48 at 230Vac with full load |
||||||
|
Inrush Current (Max.) |
<20A/240vac |
<22A/240vac |
<27A/240vac |
<21A/240vac |
<21A/240vac |
<19A/240vac |
|
|
eakage Current |
<1mA/240Vac |
||||||
|
Output |
DC Voltage Range |
12±1V |
12±1V |
12±1V |
24±1.2V |
24±1.2V |
24±1.2V |
|
Constant Curent Range |
250mA max |
500mA max |
830mA max |
120mA max |
250mA max |
410mA max |
|
|
Rated Max.Power |
3W |
6W |
10W |
3W |
6W |
10W |
|
|
Ripple &Noise(Ma note.2 |
3.6Vp-p |
4.0Vp-P |
3.6Vp-F |
3.6Vp-p |
3.6Vp-P |
4.8VP-P |
|
|
Eficlency note.1 |
69% |
65% |
70% |
70% |
77% |
78% |
|
|
Protections |
Short Circuit |
Hiccup mode,recovers automatically after fault condition is removed |
|||||
|
Environment |
Working Temp |
-10℃~40℃ ambient operating at full load |
|||||
|
Working Humidit |
20%~90%RH non-condensing |
||||||
|
Storage Temp..Humidity |
20~+80℃,10%~90%RH |
||||||
|
Safety &EMC |
Safety Standards |
meet EN61347-1,EN61347-2-13,UL1310 |
|||||
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5.6,8,11,EN61547 |
||||||
|
Withstand Voltage |
/P-O/P:3.75KVAC |
||||||
|
lsolation Resistance |
VP-O/P:100M ohms/500VDC at 25℃ |
||||||
|
Connection |
Input |
Wall mounted Plug-in for USA or Euro option |
|||||
|
Output |
UL rated,20AWGx 2C(200 cm)with DC Jack 5.5x2.1mm |
||||||
|
Others |
MTBF |
100K hours min.@Ta=25℃ |
|||||
|
Dimension(L*W*H) |
67*27*64(37)mm for USA;68*28.4*75.2(37)mm for Euro |
||||||
|
Packing(L*W*HyCarton |
520*420*220mm;100pcs/15.5Kg |
||||||
|
Note |
1.All parameters NOT specially mentioned are measured at 230V AC input,rated load and 25°C ambient temperature. |
||||||
|
2.Rippl sured at 20MHZ bandwidth oscilloscope and with 0.1uf &47uf parallel capacltor |
|||||||
|
3.The power supply is considered a component which will be installed a final equipment.The final equipment must be re-confirmed that it stil meets EMC directives |
|||||||
Key words:
3-10W AC-DC Constant Voltage LED Driver
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products