Home

200W AC-DC Constant Voltage LED Driver

Classification:

Universal AC input range 90~264VAC Constant Voltage Operation Buit-in Active PFC Function Protections: OVP/OCP/SCP/OTP High Efficiency 92.5%~93% Fully Insulated Case with IP67 Level Cooling by Free Air Convection(Metal Housing) . No Load Consumption<0.5W at 230Vac Suitable for LED Strips and Moving Sign Applications

Message

Spec Sheet

Product Specification

Model No.		LD200H-VU1K612-60		LD200H-VU83024-60	LD200H-VU55036-60	LD200H-VU41548-60
OUTPUT	DC Voltage	12V		24V	36V	48V
	Rated Current	16.7A		8.3A	5.5A	4.15A
	Current Range	0~16.7A		0~8.3A	0~5.5A	0~4.15A
	Rated Power	200.4W		199.2W	198W	199.2W
	Ripple & Noise(Max.) Note.2	350mVp-p		350mVp-p	400mVp-p	500mVp-p
	Efficiency at 230VAC(Typ.)	92.5%		93%	93%	93%
	Voltage Tolerance Note.3	±5%		±5%	±5%	±5%
	Setup Time (Max.) Note.6	0.5s / 230VAC, 1s / 115VAC, at full load.
INPUT	Rated Voltage Note.4	100 ~ 240VAC
	Voltage Range	90 ~ 264VAC
	Frequency Range	47-63Hz
	AC Current(Max)	3A at 115VAC / 1.5A at 230VAC
	Power Factor	>0.98 at 115VAC / >0.94 at 230VAC at full load. PF≧0.9 at 70% load
	Total Harmonic Distortion	THD < 20% at 230VAC, full load Note 9.
	Inrush Current(Max)	Cold Start 75A at 230VAC
	Leakage Current	<1mA / 240Vac
Protections	Over Current	105% - 180% rated output power
		Type: Auto recover after fault condition disappeared
	Short Circuit	Type: Hiccup mode & recovers after fault condition disappeared.
	Over Voltage	13~19V	26~38V		38V~50V		50V~65V
		Type: Hiccup mode (re-power on to recover).
	Over Temperature	Tcase: 100°C ±10%
		Type: Shutdown mode (re-power on to recover).
Environment	Working Temp.	-30℃~ 50℃(Refer to "Derating Curve")
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp., Humidity	-40 ~ +80℃ ,10% ~ 90% RH
	Vibration	10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes.

60 series
Model No.		LD200H-VU1K612-60	LD200H-VU83024-60	LD200H-VU55036-60	LD200H-VU41548-60
Safety&EMC	Safety Standards	EN61347-1,EN61347-2-13 ,independent,IP67 Approved.
	Withstand Voltage	I/P-O/P: 3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms / 500VDC at 25°C
	EMC Emission	Compliance to EN55015,FCC part 15
	Harmonic Current	Compliance to EN61000-3-2 Class C(≧75% load),EN61000-3-3
	EMS Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547,criteria B
Others	MTBF	120K hours min. MIL-HDBK-217F(25°C)
	Dimension(LWH)	230x 80.3 x 33.5 mm; 840g/pcs
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. 9. THD < 25% at 264VAC, full load.

Key words:

200W AC-DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible