Home

40-60W AC-DC Constant Voltage LED Driver

Classification:

Universal AC Input Range 90~264VAC. Class 2 Power Design without Earth Pin. Constant Volatge design (C.V mode) Fully isolated plastic case Protections: OCP / SCP / OVP No Load Consumption<0.5W at 230VAC. 3 years warranty

Message

Spec Sheet

Product Specification

	Model No.	LD040L-VU8005-57	LD060L-VU50012-57	LD060L-VU25024-57
Output	DC Voltage Range	5V	12V	24V
	Rated Current	0-8A	0-5A	0-2.5A
	Rated Max. Power	40W	60W	60W
	Voltage Tolerance	±5%	±5%	±5%
	Ripple & Noise (Max.) note.2	80 mVp-p	120 mVp-p	150 mVp-p
	Efficiency (Min)	76% at 230VAC full load	85% at 230VAC full load	86% at 230VAC full load
	Set up Time (Max)	<1S/115VAC at full load / <0.5S/230VAC at full load
Input	Rated Voltage	100-240VAC
	Voltage Range	90-264VAC
	Frequency Range	47~63Hz
	AC Current (Max.)	1.1A at 115VAC / 0.5A at 230VAC	1.4A at 115VAC / 0.7A at 230VAC
	Inrush Current (Max.)	30A at 115VAC / 65A at 230VAC	40A at 115VAC / 75A at 230VAC
	Leakage Current	<0.25mA / 240VAC
	No Load Consumption	<0.5W at 230VAC
Protections	Over Current	110%-150% Constant Current limiting, auto-recovery
	Short Circyit	Hiccup mode,recovers automatically after fault conditicn is removed
	Over Voltage	7-12V	14-19V	28-33V
		Protection type:Shut down o/p voltage, recovers automatically after voltage goes down.
Environment	Operation Temp.	-20oC ~ 40oC (Refer to output load derating curve)
	Operation Humidity	20%~90% RH non-condensing
	Storage Temp & Humidity	-20oC ~ +80oC,10% ~ 90% RH
Safety&EMC	Safety Standards	EN61347-1,EN61347-2-13
	Withstand Voltage	I/P-O/P:3.75K VAC
	EMI Condution & radiation	meet Compliance to EN55015; FCC PART15 CLASSB
	EMS immunity	meet Compliance to EN61000-4-2,3,4,5,6,11;EN61547 EN61000-3-2 CLASS C
Connection	Input	UL rated, 18 AWGx 2 C(150mm)
	Output	UL rated, 18 AWGx 2 C(150mm)
Others	MTBF	100K hours min. @Ta=25oC
	Dimension (LWH)	163x44.2x32.5mm; 380g/pcs
Note: 1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Key words:

40-60W AC-DC Constant Voltage LED Driver

60W AC- DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible