Home

6W AC-DC Constant Current LED Driver

Classification:

Universal AC input /range (up to 264 VAC) ￭ Class 2 Power Supply Unit Energy efficiency Level VI Comply with EISA 2007/DoE and Erp ￭ Protections: OCP/SCP/OTP Fully isolated plastic case 2 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD006H-CU07009-PI	LD006H-CU05012-PI	LD006H-CU02524-PI	LD006H-CU03512-PI
OUTPUT	DC Voltage Range	6-9 V	7-12V	14-24V	7-12V
	Rated Current	700mA	500mA	250mA	350mA
	Rated Power	6W	6W	6W	4.2 W
	Ripple & Noise(Max.) Note.2	3.6Vp-p	3.6Vp-p	3.6Vp-p	3.6Vp-p
	Voltage Tolerance Note.3	± 6%
	Line Regulation	± 2%
	Load Regulation	± 6%
INPUT	Voltage Range Note.4	100-240VAC
	Frequency Range	50/60 Hz
	Efficiency(Typ.) meet Efficency level VI	79%	80%	80%	79%
	AC Current	0.2A at 115Vac 0.15A at 230Vac
	Inrush Current(Max)	25A at 230Vac
Protections	Over Current	110 % - 120 % Constant current limiting, auto-recovery
	Short Circuit	Protection Type: Hiccup mode, recovers automatically after fault condition is removed
	Over Temperature	Shutdown o/p voltage,recovers automatically after temperature goes down.
Environment	Working Temp.	-10 ℃~ 40℃(Refer to "Derating Curve")
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.,Humidity	-20 ~ +80℃ ,10% ~ 95% RH
Safety & EMC	Safety Standards	meet EN61347-1,EN61347-2-13 ,UL8750 refer UL1310
	Withstand Voltage	I/P - O/P: 3.75K VAC
	Isolation Resistance	I/P - O/P:>100M Ohms /500Vdc / 25℃ /70% RH
	EMC Emission	Compliance tomeet EN55015,FCC Class B
	EMC Immunity	Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11
Connection	Input	Wall mounted Plug-in for USA or Euro option
	Output	UL rated, 20 AWGx 2 C( 200 mm) with DC Jack 5.5x2.1mm
Others	LIFE	2 year; 100%Load 40℃,8 hours/day
	MTBF	100K hours min. @Ta=25 ℃
	Dimension(LWH)	67 * 27 * 64(37) mm
	Packing(LWH)/Carton	520 * 420 * 220 mm; 100 pcs/ 15.5 Kg
Note: 1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf paraliel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Dlrective on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure.

Key words:

6W AC-DC Constant Current LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible