Home

60W AC-DC Constant Current LED Driver

Classification:

Universal AC input /range (100 to 264 VAC) Constant Current design Class 2 Power Supply Unit Fully isolated plastic case Protections: ■Over current/ ■ Short Circuit / ■ Over Temperature 2 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD060L-CU50012-40	LD060L-CU25024-40	LD060L-CU16736-40	LD060L-CU14242-40	LD060L-CU12548-40
Input	Voltage & Frequency Range	100-240VAC/ 264 V AC; 50 Hz / 60 Hz
	AC Current (Max.)	0.95 A at 115Vac/ 0.6 A at 230Vac
	Power Factor	> 0.5at 115Vac/ 230Vac with full load.
	Inrush Current (Max.)	< 60 A at 230 Vac
	Leakage Current	< 1 mA / 230 Vac
Output	DC Voltage Range （VF）	9-12 V	17-24 V	25-36 V	28-42 V	32-48v
	Constant Current Range	5000 mA'± 8 %	2500 mA'± 8%	1670 mA'± 8 %	1420 mA'± 8 %	1250 mA'± 8 %
	Rated Max. Power	60 W	60 W	60 W	60 W	60 W
	Ripple & Noise(Max.) note.2	180 mVp-p	240 mVp-p	360 mVp-p	420 mVp-p	480 mVp-p
	Efficiency note.1	83 %	85%	85 %	85 %	85 %
Protections	Over Current	100 % - 120 % Constant current limiting, auto-recovery
	Short Circuit	recovers automatically after fault condition is removed
Environment	Working Temp.	-10 ℃~ 40 ℃ambient operating at full load (Refer to output load derating curve)
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.,Humidity	-20 ~ +80℃ ,10% ~ 90% RH
Safety & EMC	Safety Standards	meet EN61347-1,EN61347-2-13
	EMC Standards note.3	meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547
	Withstand Voltage	I/P - O/P: 3.75 K VAC
	Isolation Resistance	I/P-O/P:100M ohms / 500VDC at 25 ℃
Connection	Input	UL rated, 18 AWGx 2 C( 150 mm)
	Output	UL rated, 18 AWGx 2 C( 150 mm)
Others	MTBF	100K hours min. @Ta=25 ℃
	Dimension(LWH)	161 * 41.0 * 32 .0 mm
	Packing(LWH)/Carton	390 * 280 * 210 mm; 50 pcs/ 20.0 Kg
Note	1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient t emperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives.

Key words:

60W AC-DC Constant Current LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible