26~42W AC-DC Constant Current LED Driver
Classification:
universal AC input / range(90 to 264 VAC) Constant Current mode output Class 2 Power Supply Unit Built in PFC Function and Flicker Free design No load/Standby power consumption<0.5W SELV and Fully isolated plastic case Protections :Over Voltage/ Short Circuit 3 years warranty

Product Specification
|
Model No. |
LD042H-CU10540-51 |
LD036H-CU09040-51 |
LD042H-CU08052-51 |
LD036H-CU07052-51 |
|||
|
Output |
DC Voltage Range(VF) |
12-40V |
12-40V |
22-52V |
22-52V |
||
|
Constant Current Range |
1050mA ± 5% |
900mA ± 5% |
800mA ± 5% |
700mA ± 5% |
|||
|
Rated Max. Power |
42W |
36W |
42W |
36W |
|||
|
Ripple & Noise (Max.) note.2 |
200mVp-p |
200mVp-p |
200mVp-p |
200mVp-p |
|||
|
Efficiency note.1 |
≥86.85% |
≥86.07% |
≥86.9% |
≥86.4% |
|||
|
Set up time (Max.) |
0.5 S.@ 230Vac & Full load |
||||||
|
|
Model No. |
LD031H-CU06052-51 |
LD026H-CU05052-51 |
LD040H-CU16724-51 |
|||
|
Output |
DC Voltage Range(VF) |
22-52V |
22-52V |
8-24V |
|||
|
Constant Current Range |
600mA ± 5% |
500mA ± 5% |
1670mA ± 5% |
||||
|
Rated Max. Power |
31W |
26W |
40W |
||||
|
Ripple & Noise (Max.) note.2 |
200mVp-p |
200mVp-p |
200mVp-p |
||||
|
Efficiency note.1 |
≥86% |
≥85% |
≥83.4% |
||||
|
Set up time (Max.) |
0.5 S.@ 230Vac & Full load |
||||||
|
Input |
Voltage & Frequency Range |
100~240VAC; 50 Hz / 60 Hz |
|||||
|
AC Current (Max.) |
0.65 A @115Vac/ 0.4A @ 230Vac |
||||||
|
Power Factor |
>0.95 @ 115Vac; >0.9 @ 230Vac with full load. |
||||||
|
Total Harmonic Distortion |
THD< 10% @ 230Vac & Full load. |
||||||
|
Harmonic Current |
Compliance to EN61000-3-2 Class C (100% load), EN61000-3-3 |
||||||
|
Inrush Current (Max.) |
<15A @115Vac / <25 A @ 230 Vac |
||||||
|
Leakage Current |
< 1 mA / 230 Vac |
||||||
|
Protections |
Over Voltage |
110 % - 150 % Voltage limiting, auto-recovery |
|||||
|
Short Output |
Recovers automatically after fault condition is removed |
||||||
|
Environment |
Working Temp. |
-20oC~ 40oC(Refer to output load derating curve) |
|||||
|
Working Humidity |
20% ~ 90% RH, non-condensing. |
||||||
|
Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
||||||
|
Storage Temp, Humidity |
-40 ~ +80oC,10% ~ 90% RH |
||||||
|
Safety&EMC |
Safety Standards |
Meet EN61347-1, EN61347-2-13 |
|||||
|
EMC Standards note.3 |
Meet EN55015, EN61000-4-2,3,4,5,6,8,11, EN61547 |
||||||
|
Withstand Voltage |
I/P - O/P: 3.75 KVAC |
||||||
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC@ 25oC |
||||||
|
http://www.esop-power.com Ever Shining Optotech Co., Ltd |
|||||||
|
|
|
||
|
Connection |
Input |
UL rated, 18 AWG x 2 C (150 mm+/-10mm) |
|
|
Output |
UL rated, 18 AWG x 2 C (150 mm+/-10mm) |
||
|
Others |
MTBF |
100K hours min. @Ta=25oC |
|
|
Dimension(L*W*H) |
110 * 35 * 25 mm |
||
|
Packing(L*W*H)/Carton |
|
||
|
Note |
1. All parameters NOT specially mentioned are measured at 230VAC/50Hz input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHz bandwidth oscilloscope and with 0.1uF & 47uF paralleled capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed. |
||
Key words:
26~42W AC-DC Constant Current LED Driver
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products
51 Series