40W AC-DC Constant Current LED Driver
Classification:
Input Range From 220-240VAC Built-inactive PFC Function Constant Current design (C .C mode) Compact lightweight in plastic application Low Flicker Design Designed for indoor application Protections: Over current / Short Circuit 3 years warranty

Product Specification
|
Model No. |
LD021H-CE05042-M28F |
LD025H-CE06042-M28F |
LD030H-CE07043-M28F |
LD040H-CE09045-M28F |
|
|
Output |
DC Voltage Range |
30 - 42 V |
30 - 42 V |
30 - 43 V |
30 - 45 V |
|
|
Rated Current |
500mA |
600mA |
700mA |
900mA |
|
|
Current Tolerance |
±5% |
±5% |
±5% |
±5% |
|
|
Rated Power |
21W Max |
25W Max |
30W Max |
40W Max |
|
|
Ripple &Noise note.2 |
<1Vp-p |
<1Vp-p |
<1Vp-p |
<1Vp-p |
|
|
Efficiency note.1 |
>85% |
>85% |
>86% |
>86% |
|
Input |
Voltage & Frequency |
220-240VAC/50hz |
|||
|
|
AC Current (Max.) |
0.13A |
|||
|
|
Power Factor |
≥0.90 at 230Vac with full load. |
|||
|
|
Inrush Current (Max.) |
20A at 230Vac |
|||
|
|
Leakage Current |
<1mA/230Vac |
|||
|
Protections |
Over Current |
100% - 120% Constant current limiting, auto-recovery |
|||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|||
|
Environment |
Working Temp. |
-20℃ ~ 50℃ (Refer to Derating cure) |
|||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
|||
|
|
Storage Temp., Humidity |
-20 ~ +80℃ ,10% ~ 90% RH |
|||
|
Safety &EMC |
Safety Standards |
meet EN61347-1,EN61347-2-13,UL8750 refer UL1310 |
|||
|
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547 |
|||
|
|
Withstand Voltage |
I/P - O/P:3.75 K VAC |
|||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
|||
|
Connection |
Input |
UL rated,18 AWG x 2 C(180 mm) |
|||
|
|
Output |
UL rated,18 AWG x 2 C(180 mm) ,(Vo+, Vo-,) |
|||
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
|||
|
|
Dimension(L*W*H) |
88.5* 41.5 * 30.5 mm |
|||
|
|
Packing(L*W*H)/Carton |
445 * 275 * 210mm; 180g/pcs |
|||
|
Note 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives. |
|||||
Key words:
40W AC-DC Constant Current LED Driver
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products