12W~20W Constant Current LED Driver
Classification:
Input Range 230VAC±10% Built-inactive PFC Function Constant Current design (C .C mode) Compact, lightweight in plastic application . Designed for indoor application Protections: Over current/Short Circuit 3 years warranty

Product Specification
|
Model No. |
LD012H-CE02546-M18F |
LD014H-CE03046-M18F |
LD016H-CE03546-M18F |
LD018H-CE04046-M18F |
LD018H-CE04540-M18F |
LD020H-CE05040-M18F |
|
|
Output |
DC Voltage Range |
30--46V |
30-46V |
30-46V |
30-46V |
30-40V |
30-40V |
|
|
Rated Current |
250MA |
300MA |
350MA |
400MA |
450MA |
500MA |
|
|
Current Tolerance |
±7% |
±7% |
±7% |
±7% |
±7% |
±7% |
|
|
Rated Power |
12W |
14W |
16W |
18W |
18W |
20W |
|
|
Ripple & Noise note.2 |
<1.0 Vp-p |
|||||
|
|
Efficiency note.1 |
>80% |
>80% |
>81% |
>81% |
>82% |
>82% |
|
Input |
Voltage & Frequency Range |
230VAC /50Hz |
|||||
|
|
AC Current (Max.) |
< 0.07A |
|||||
|
|
Power Factor |
>0.9 at 230Vac with full load. |
|||||
|
|
Inrush Current (Max.) |
< 30A at 230Vac |
|||||
|
|
Leakage Current |
< 5mA/230Vac |
|||||
|
Protections |
Over Current |
100% - 120% Constant current limiting, auto-recovery |
|||||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|||||
|
Environment |
Working Temp. |
-20℃~ 50℃(Refer to Derating cure) |
|||||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
|||||
|
|
Storage Temp., Humidity |
-20 ~ +60℃ ,10% ~ 90% RH |
|||||
|
Safety & EMC |
Safety Standards |
meet GB19510.1-2009;GB19510.14-2009 |
|||||
|
|
EMC Standards note.3 |
meet GB/T17743-2017 |
|||||
|
|
Withstand Voltage |
I/P - O/P: 3750VAC |
|||||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
|||||
|
Connection |
Input |
VDE rated,1015 18 AWG x 2 (160mm) |
|||||
|
|
Output |
VDE rated, 1007 18 AWG x 2 (300mm) ,(Vo+, Vo-,) |
|||||
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
|||||
|
|
Dimension(L*W*H) |
85.5 * 38 * 28mm |
|||||
|
|
Packing(L*W*H)/Carton |
430*255* 185mm;124g/pcs |
|||||
|
Note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives. |
|||||||
Key words:
12W~20W Constant Current LED Driver
Previous Page
Next Page
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products