6-10W AC-DC Constant Current LED Driver
Classification:
220-240V AC input Constant Current design . Class 2 Power Supply Unit . Fully isolated plastic case Protections: OVP/SCP . Low Flicker Design 3 years warranty

Product Specification
|
Model No. |
LD007H-CE01540-M9F |
LD007H-CE01840-M9F |
LD010H-CE02240-M9F |
LD010H-CE02540-M9F |
|
|
Output |
DC Voltage Range |
21-40V |
21-40V |
21-40V |
21-40V |
|
|
Constant Current Range |
150mA ±5% |
180mA ±5% |
220mA ±5% |
250mA ±5% |
|
|
Rated Max. Power |
6W |
7.2W |
8.8W |
10W |
|
|
Ripple & Noise note.2 |
<1Vp-p |
<1Vp-p |
<1Vp-p |
<1Vp-p |
|
|
Efficiency note.1 |
>70% |
>73% |
>74% |
>75% |
|
Input |
Voltage & Frequency Range |
230V 50Hz |
|||
|
|
AC Current (Max.) |
0.048A at 230Vac |
0.048A at 230Vac |
0.048A at 230Vac |
0.053A at 230Vac |
|
|
Power Factor |
>0.9 at with full load |
|||
|
|
Inrush Current (Max.) |
3A at 230Vac |
|||
|
|
Leakage Current |
<1mA/230Vac |
|||
|
Protections |
Over Voltage |
45-47V |
|||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|||
|
Environment |
Working Temp. |
-20℃ ~ 50℃ambient operating at full load (Refer to output load derating curve) |
|||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
|||
|
|
Storage Temp., Humidity |
-20 ~ +80℃ ,10% ~ 90% RH |
|||
|
Safety & EMC |
Safety Standards |
meet GB19510.1-2009;GB19510.14-2009 |
|||
|
|
EMC Standards note.3 |
meet GB/T17743-2017 |
|||
|
|
Withstand Voltage |
I/P - O/P:3.75 K VAC |
|||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
|||
|
Connection |
Input |
UL rated,1015 18AWG x 2 C(245 mm) |
|||
|
|
Output |
UL rated,1007 20 AWG x 2 C(175 mm) |
|||
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
|||
|
|
Dimension(L*W*H) |
70.5 * 34.5 * 25mm |
|||
|
|
Packing(L*W*H)/Carton |
380 * 270 * 180mm; 95g/ pcs |
|||
|
Note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives. 4. ELV dimmer with 120Vac+/-10% only. |
|||||
Key words:
6-10W AC-DC Constant Current LED Driver
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products