9W AC-DC Constant Current LED Driver
Classification:
Universal AC input /Full range(up to 304 VAC) Constant Current design Class 2 Power Supply Unit Built-in PFC Function Fully isolated plastic case 2 years warranty Protections: Over current / Short Circuit

Product Specification
|
Model No |
LD009H-CU07512-27 LD009H-CU03724-27|LD009H-CU02536-27|LD009H-CU02242-27|LD009H-CU01948-27 |
|||||
|
Input |
Voltage 8 Frequency Rang |
100-240VAC/277VAC;50Hz/60Hz |
||||
|
AC Current (Max. |
0.11A at 115Vac/0.05A at 230Vac |
|||||
|
Power Factor |
>0.95 at 115Vac/>0.92 at 230Vac with full load |
|||||
|
Inrush Current (Max.) |
15A at 240Vac |
|||||
|
Leakage Current |
<1mA/240Vac |
|||||
|
Output |
DC Voltage Range |
7-12V |
13-24V |
18-36 V |
21-42 V |
24-48V |
|
Constant Current Range |
750mA'±6% |
375mA*6% |
250mA'±6% |
220mA±6% |
190mA±6% |
|
|
Rated Max.Power |
9W |
9W |
9W |
9W |
9W |
|
|
Ripple &Noise(Max.)note.2 |
3.0Vp-P |
3.0Vp-p |
3.0Vp-p |
3.0Vp-P |
3.0Vp-p |
|
|
Eficiency note.1 |
78% |
82% |
86% |
84% |
83% |
|
|
Protections |
Over Current |
110%-120%Constant current limiting,auto-recovery |
||||
|
Short Circuit |
Hiccup mode,recovers automatically after fault condition is removed |
|||||
|
Environment |
Working Temp. |
-10 ℃~40 ℃ambient operating at full load |
||||
|
Working Humidit |
20%~90%RH non-condensing |
|||||
|
Storage Temp..Humidity |
20~+80℃,10%~90%RH |
|||||
|
Safety &EMC |
Safety Standards |
meot EN61347-1,EN61347-2-13,UL8750 refer UL1310* |
||||
|
EMC Standards note.3 |
meot EN55015,EN61000-4-2,3,4,5,6,8,11,EN61547 |
|||||
|
Withstand Voltage |
VP-O/P:3.75 KVAC |
|||||
|
Isolation Resistance |
VP-O/P:100M ohms/500VDC at 25℃ |
|||||
|
Connection |
Input |
UL rated,20 AWGx2C(150mm |
||||
|
Output |
UL rated,20 AWGx 2C(150mm) |
|||||
|
others |
MTBF |
100K hours min.@Ta=25℃ |
||||
|
Dimension(L*W*H) |
58*58*27mm |
|||||
|
Packing(L*W*HYCarton |
340*340*170mm;100pcs/11.0Kg |
|||||
|
Note |
.All parameters NOT specially mentioned are measured at 230V AC input,rated load and 25°C ambient temperature. |
|||||
|
2.Ripple &Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf &47uf parallel capacitor |
||||||
|
3.The power supply is considered a component which will be installed a final equipment.The final equipment must be re-confirmed that it stil meets EMC directives |
||||||
Key words:
9W AC-DC Constant Current LED Driver
Previous Page
Next Page
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products