Home

7W AC-DC Constant Current LED Driver

Classification:

Universal AC input 90~264V AC Constant Current Mode Suitable for High Brightness Light-Emitting Diode products. Protections: OCP / SCP Cooling by free air convection Meet application for ErP (EU) 2019/2020 No-Load Power Consumption < 0.5W Set up time < 0.5S at 230Vac IP67

Message

Spec Sheet

Product Specification

Model No.		LD008L-CU06811-50P	LD008L-CU05015-50P		LD008L-CU03521-50P		LD008L-CU03024-50P
Output	DC Voltage	11V	14.5V		21V		24V
	Current Range	2 ~ 11V	2 ~ 14.5V		2 ~ 21V		2 ~ 24V
	Rated Power	7.48W	7.25W		7.35W		7.2W
	Rated Current (Max.) note.2	680mA	500mA		350mA		300mA
	Efficiency at 240VAC(Typ.)	75%	75%		75%		75%
	Voltage Tolerance	±5%
	Current Tolerance No Load	±7%
	Set up Time	< 0.5S at 230Vac full load
	Model No.	LD008L-CU02528-50P		LD008L-CU02038-50P		LD008L-CU01548-50P
Output	DC Voltage	28V		38V		48V
	Current Range	10 ~ 28V		12 ~ 38V		18 ~ 48V
	Rated Power	7W		7.6W		7.2W
	Rated Current (Max.) note.2	250mA		200mA		150mA
	Efficiency at 240VAC(Typ.)	78%		79%		80%
	Voltage Tolerance	±5%
	Current Tolerance No Load	±7%
	Set up Time	< 0.5S at 230Vac full load
Input	Voltage Range	90VAC ~ 264VAC
	Rated Voltage	100 - 240V AC
	Frequency Range	50 Hz -60 Hz
	Power Factor	> 0.5 at 230Vac
	No-Load Power	< 0.5W at 230Vac
	Inrush Current(Typ)	Cold Start 7A (Td=410us measured at 50% Ipeak) at 230VAC
	Max. Number of PSUs on circuit Breaker	B type : 25 units (10A) / 41 units (16A) / 64 units (25A), C type : 42 units (10A) / 68 units (16A) / 107 units (25A), D type : 137 units (16A) / 214 units (25A) at 230VAC
	AC Current(Max.)	0.2A
Protections	Over Current	Constant current mode protection
	Short Circuit	Type: Hiccup mode & recovers after fault condition disappeared
http://www.esop-power.com Ever Shining Optotech Co., Ltd

51 Series
Environment		Operation Temp	-20 ~ +50°C
		Operation Humidity	20% ~ 90% RH non -condensing.
		Storage Temp	- 40 ~ +80°C
		Storage Humidity	10% ~ 95% RH
		Vibration	10 ~ 500 Hz, 2G 10 min. / 1 cycle, period for 60 min. each along X,Y, Z axes
Safety&EMC		Safety Standards	Compliance EN61347 - 1,EN61347 -2 - 13 ,IP67
		Withstand Voltage	I/P -O/P: 3.75KVAC
		Isolation Resistan	I/P -O/P :100M ohms / 500V DC at 25°C
		EMI Conduction & Radiation	Compliance to EN55015,FCC part 15
		Harmonic Current	Compliance to EN61000 -3 -2 Class C,EN61000 -3 -3
		EMS Immunity	Compliance to EN61000 -4 -2,3,4,5,6,8,11;EN61547
Others		MTBF	200K hours min.MIL-HDBK-217F(25°C)
		Dimension(LWH)	57 x 41 x 24mm
		Packing(LWH)/Carton	100pcs/Carton
		Weight	74g
Note	1. All specifications not specially mentioned are measured at 230V AC full load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHz bandwidth by using a 12" twisted pair -wire terminated with 0.1uf & 47uf paralle capacitor. 3. Voltage Tolerance: includes line regulation, load regulation and set -up tolerance. 4. Constant current operation region is within 75%~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.

Key words:

7W AC-DC Constant Current LED Driver

None

3-8W Constant Current LED Driver

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible