AC-DC Constant Current LED Driver
Classification:
Universal AC input /Full range (up to 264 VAC) Constant Current design Class 2 Power Supply Unit Fully isolated plastic case Protections: ■Over current/ ■ Short Circuit / ■ Over Temperature 2 years warranty

Product Specification
|
Model No. |
LD003L-CU07004-M2 |
LD002L-CU03504-M2 |
LD002L-CU05004-M2 |
|
|
|
Input |
Voltage & Frequency Range |
100-240V AC; 50 Hz ~ 60 Hz |
|||
|
|
AC Current (Max.) |
0.06A at 115Vac/ 0.03 A at 230Vac |
|||
|
|
Power Factor |
> 0.7at 115Vac / > 0.6 at 230Vac with full load. |
|||
|
|
Inrush Current (Max.) |
< 50 A |
|||
|
|
Leakage Current |
< 1 mA / 240 Vac |
|||
|
Output |
DC Voltage Range ( VF) |
2.8-4 V |
2.8-4 V |
2.8-4 V |
|
|
|
Constant Current Range |
700mA :7% |
350mA ±7% |
500mA ±7% |
|
|
|
Rated Max. Power |
2.8W |
1.4W |
2.0W |
|
|
|
Ripple & Noise(Max.) note.2 |
3 .0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
|
|
|
Efficiency note.1 |
68% |
72% |
69% |
|
|
Protections |
Over Current |
110 % - 120 % Constant current limiting, auto-recovery |
|||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|||
|
Environment |
Working Temp. |
- 10 ℃~ 40 ℃ambient operating at full load (Refer to output load derating curve) |
|||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
|||
|
|
Storage Temp.,Humidity |
-20 ~ +80℃ ,10% ~ 90% RH |
|||
|
Safety & EMC |
Safety Standards |
meet EN61347-1,EN61347-2-13 ,UL8750 refer UL1310 |
|||
|
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547 , FCC PART15 CLASS B |
|||
|
|
ErP Standards |
meet EC279/2009,EN50563:2011 |
|||
|
|
Withstand Voltage |
I/P - O/P: 3.75 K VAC |
|||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
|||
|
Connection |
Input |
UL rated, 20 AWGx 2 C( 150 mm) |
|||
|
|
Output |
UL rated, 20 AWGx 2 C( 150 mm) |
|||
|
Others |
MTBF |
20K hours min. @Tcase=75 ℃ or 30K hours min. @Tcase=65 ℃ |
|||
|
|
Dimension(L*W*H) |
37 * 25 * 20.5 mm |
|||
|
|
Packing(L*W*H)/Carton |
320 * 220 * 240 mm ; 200pcs / 9.0Kg |
|||
|
Note |
1. Reference are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives. |
||||
Key words:
AC-DC Constant Current LED Driver
Previous Page
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products