18W~22W Constant Current LED Driver with Triac dimming
Classification:
Input Range From 120Vac ±10% Work With Leading Edge And Trailing Edge Dimmers With Power Factor Correction Function: PF>0.95 Low Flicker Design Protections : OCP / SCP 3 Years Warranty

Product Specification
|
Model No. |
LD015D-CA085018-M18F |
LD020D-CA08524-M18F |
LD020D-CA05536-M18F |
LD021D-CA05042-M18F |
LD022D-CA04054-M18F |
|
|
Output |
DC Voltage Range |
9-18V |
15-24V |
21-36V |
27-42V |
42-54V |
|
|
Rated Current |
850MA |
850MA |
550MA |
500MA |
400MA |
|
|
Current Tolerance |
±7% |
±7% |
±5% |
±5% |
±5% |
|
|
Rated Power |
15.3 W |
20.4W |
19.8W |
21W |
21.6W |
|
|
Ripple & Noise note.2 (Max.) |
300mVp-p |
350mVp-p |
400mVp-p |
450mVp-p |
500mVp-p |
|
|
Efficiency note.1(Typ.) |
80% |
82.5% |
82.5% |
83% |
84% |
|
Input |
Rated Voltage Range |
108~132VAC |
||||
|
|
Frequency |
60Hz |
||||
|
|
AC Current (Max.) |
0.3A at 120VAC |
||||
|
|
Power Factor |
> 0.95 at 120Vac with full load. |
||||
|
|
Total Harmonic Distortion |
THD < 10% at 120VAC, full load |
||||
|
|
Inrush Current (Max.) |
<20A at 120Vac |
||||
|
|
Leakage Current |
< 5mA/120Vac |
||||
|
Protections |
Over Current |
100% -120% Constant current limiting, auto-recovery |
||||
|
|
Short Circuit |
Type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Environment |
Working Temp. |
-20℃~ 60℃(Refer to Derating cure) |
||||
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
||||
|
|
Storage Temp., Humidity |
-20 ~ +60℃ ,10% ~ 90% RH |
||||
|
Safety& EMC |
Safety Standards |
meet UL8750 1310 |
||||
|
|
EMC Standards note.3 |
FCC part 15 |
||||
|
|
Withstand Voltage |
I/P - O/P: 1250VAC |
||||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
||||
|
Connection |
Input |
UL rated, 1015#18 X 2C (250 mm) |
||||
|
|
Output |
UL rated, 1007#20 X 2C (150 mm) |
||||
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
||||
|
|
Dimension(L*W*H) |
85.5 * 38 * 28mm |
||||
|
|
Packing(L*W*H)/Carton |
430*255* 185mm;125g/pcs |
||||
|
Note1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives. |
||||||
Key words:
18W~22W Constant Current LED Driver with Triac dimming
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products