15W Constant Current LED Driver with Triac dimming
Classification:
Input Range 120Vac ± 10% Work With Leading Edge And Trailing Edge Dimmers With Power Factor Correction Function: PF>0.9 Low Flicker Design Protections : OVP/SCP 3 Years Warranty

Product Specification
|
Model No. |
LD015D-CA02854-28F |
LD015D-CA03543-28F |
LD015D-CA05030-28F |
LD015D-CA07022-28F |
LD015D-CA10015-28F |
|
|
Output |
DC Voltage Range |
30-54V |
26-43V |
18-30V |
13-22V |
8-15V |
|
|
Rated Current |
280mA |
350mA |
500mA |
700mA |
1000mA |
|
|
Rated Max. Power |
15. 12W |
15W |
15W |
15W |
15W |
|
|
Current Tolerance |
±6% |
±6% |
±6% |
±6% |
±6% |
|
|
Ripple & Noise (Max.)note.2 |
80mvp-p |
80mvp-p |
80mvp-p |
80mvp-p |
80mvp-p |
|
|
Efficiency note.1 |
≥83% |
≥83% |
≥82% |
≥82% |
≥82% |
|
Input |
Voltage Range(VAC) |
120Vac ± 10% |
||||
|
|
Frequency Range |
50 / 60Hz |
||||
|
|
AC Current (Max.) |
0.2 A |
||||
|
|
Power Factor |
>0.9 at 120Vac with full load |
||||
|
|
Inrush Current (Max.) |
< 10A |
||||
|
|
Leakage Current |
<1mA / 230Vac |
||||
|
Protections |
Over Voltage |
52-58V |
45-50V |
32-40V |
24-30V |
17-24V |
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Environment |
Operation Temp. |
-20oC ~ 65oC (Refer to output load derating curve) |
||||
|
|
Operation Humidity |
20% ~ 90% RH non-condensing. |
||||
|
|
Storage Temp |
-20oC ~ +80oC |
||||
|
|
Storage Humidity |
10% ~ 90% RH |
||||
|
Safety & EMC |
Safety Standards |
meet UL8750 1310 |
||||
|
|
Withstand Voltage |
I/P-O/P: 1.25K VAC |
||||
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25oC |
||||
|
|
EMC Standards note.3 |
FCC part 15 |
||||
|
Connection |
Input |
UL rated, 1007#20 AWG x 2 C(150mm) |
||||
|
|
Output |
UL rated, 1007#20 AWG x 2 C(150mm),(Vo+, Vo-,) |
||||
|
Others |
MTBF |
100K hours min. @Ta=25oC |
||||
|
|
Dimension(L*W*H) |
Φ48x25mm |
||||
|
|
Packing(L*W*H)/Carton |
380 * 270 * 180 mm ; 65g/pcs |
||||
|
Note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ band width oscilloscope and with 0. 1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. 4. The final equipment mustbe re - confirmed that it still meets EMC directives. |
||||||
Key words:
15W Constant Current LED Driver with Triac dimming
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products