12W AC-DC Constant Current LED Driver with 0/1-10V Dimming
Classification:
Universal Input range from 110 to 277 VAC Fully Potted suitable for dry and damp location applications ■ Built-inactive PFC Function Constant Current design (C .C mode) 0/1-10V Dimming Control UL8750 and CE compliant Wide selection of per-adjusted C/C outputs (factory setting) ■ Protections : Over current / Short Circuit / Over Temperature 3 years warranty

Product Specification
|
Model No. |
LD012H- CU10012-Q12P |
LD012H- CU05024-Q12P |
LD012H- CU02530-Q12P |
LD012H- CU03536-Q12P |
LD012H- CU02042-Q12P |
LD012H- CU02548-Q12P |
LD012H- CU02254-Q12P |
|
|
Output |
DC Voltage Range |
6-12 V |
15-24 V |
18-30 V |
24-36 V |
27-42 V |
42-48 V |
46-54 V |
|
|
Rated Current |
1000 mA |
500 mA |
250 mA |
350 mA |
200 mA |
250 mA |
220 mA |
|
|
Rated Max. Power |
12 W |
12 W |
7.5W |
12 W |
8.4W |
12 W |
12 W |
|
|
Current Tolerance |
±5% |
±5% |
±5% |
±5% |
±5% |
±5% |
±5% |
|
|
Ripple & Noise (Max.) note.2 |
3.0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
3.0 Vp-p |
|
|
Efficiency note.1 |
82% |
84% |
85% |
85% |
85% |
85% |
85% |
|
|
Set up Time (Max) |
500ms / 230Vac at full load |
||||||
|
Input |
Rated Voltage |
110 - 277VAC |
||||||
|
|
Frequency Range |
50 ~ 60Hz |
||||||
|
|
AC Current (Max.) |
0.13A at 240Vac |
||||||
|
|
Power Factor |
> 0.92 at 240Vac with full load. |
||||||
|
|
Inrush Current (Max.) |
≤ 30A at 240Vac |
||||||
|
|
Leakage Current |
< 1mA / 240Vac |
||||||
|
Protections |
Over Current |
100% - 120% Constant current limiting, auto-recovery |
||||||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||||||
|
|
Over Temperature |
Shut down o/p voltage,recovers automatically after temperature goes down. |
||||||
|
Environment |
Operation Temp. |
-10℃ ~ 60℃ (Refer to output load derating curve) |
||||||
|
|
Operation Humidity |
20% ~ 90% RH non-condensing. |
||||||
|
|
Storage Temp |
-20℃ ~ +80℃ |
||||||
|
|
Storage Humidity |
10% ~ 90% RH |
||||||
|
Safety & EMC |
Safety Standards |
meet EN61347-1, EN61347-2-13, UL8750 refer UL1310 |
||||||
|
|
Withstand Voltage |
I/P - O/P : 3.75K VAC |
||||||
|
|
Isolation Resistance |
I/P - O/P : 100M ohms / 500VDC at 25℃ |
||||||
|
|
EMI Conduction & radiation |
meet EN55015 |
||||||
|
|
EMS Immunity |
meet EN61000-4-2, 3, 4, 5, 6, 11 ; EN61547 |
||||||
|
Connection |
Input |
UL rated, 18AWGx 2 C (150 mm) |
||||||
|
|
Output |
UL rated, 18AWGx 2 C, 20 AWGx 3 C (150 mm) |
||||||
|
Others |
MTBF |
100K hours min. @Ta=25℃ |
||||||
|
|
Dimension (L*W*H) |
85.5 * 38.0 * 25.0 mm |
||||||
|
|
Packing (L*W*H) / Carton |
310 * 295 * 240 mm ; 50 pcs / 15.5 Kg |
||||||
|
Note |
1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives. |
|||||||
Key words:
12W AC-DC Constant Current LED Driver with 0/1-10V Dimming
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products