12W Constant Current LED Driver with Triac dimming
Classification:
240V AC Input (up to 264 VAC) Built-inactive PFC Function Constant Current design (C .C mode) Fully isolated plastic case Protections : Over Current / Short Circuit 2 years warranty

Product Specification
|
Model No. |
LD012D-CE10012-26 |
LD012D-CE07018-26 |
LD012D-CE03536-26 |
|
|
Output |
DC Voltage Range |
7-12V |
12-18V |
24-36V |
|
|
Rated Current |
1000mA |
700mA |
350mA |
|
|
Rated Max. Power |
12W |
12W |
12W |
|
|
Current Tolerance |
±6% |
±6% |
±6% |
|
|
Ripple & Noise (Max.) note.2 |
3.0 Vp-p |
3.0 Vp-p |
3.6 Vp-p |
|
|
Efficiency note.1 |
81% |
81% |
82% |
|
|
Set up Time (Max) |
3S / 230Vac at full load |
||
|
Input |
Rated Voltage |
216 - 264VAC |
||
|
|
Frequency Range |
50 / 60Hz |
||
|
|
AC Current (Max.) |
0.11A at 240Vac |
||
|
|
Power Factor |
> 0.90 at 240Vac with full load. |
||
|
|
Inrush Current (Max.) |
≤ 30A at 240Vac |
||
|
|
Leakage Current |
< 1mA / 240Vac |
||
|
Protections |
Over Current |
100% - 120% Constant current limiting, auto-recovery |
||
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||
|
Environment |
Operation Temp. |
-10℃ ~ 50℃ (Refer to output load derating curve) |
||
|
|
Operation Humidity |
20% ~ 90% RH non-condensing. |
||
|
|
Storage Temp |
-20℃ ~ +80℃ |
||
|
|
Storage Humidity |
10% ~ 90% RH |
||
|
Safety & EMC |
Safety Standards |
meet EN61347-1, EN61347-2-13 |
||
|
|
Withstand Voltage |
I/P - O/P : 3.75K VAC |
||
|
|
Isolation Resistance |
I/P-O/P : 100M ohms / 500VDC at 25℃ |
||
|
|
EMI Conduction & radiation |
meet EN55015 |
||
|
|
EMS Immunity |
meet EN61000-4-2, 3, 4, 5, 6, 11 ; EN61547 ; EN61000-3-2 |
||
|
Connection |
Input |
UL rated, 18 AWGx 2C (150 mm) |
||
|
|
Output |
UL rated, 18 AWGx 2C (150 mm) |
||
|
Others |
MTBF |
100K hours min. @Ta=25℃ |
||
|
|
Dimension (L*W*H) |
65.9 * 65.9 * 26.75 mm |
||
|
|
Packing (L*W*H) / Carton |
487 * 352 * 230 mm ; 100 pcs / 15.5 kg |
||
|
Note |
1. All parameters NOT specially mentioned are measured at 120V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives. |
|||
Key words:
12W Constant Current LED Driver with Triac dimming
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products