Home

120W AC-DC Constant Voltage LED Driver with Triac Dimming

Classification:

AC phase-cut dimming Input Range from 200VAC to 264VAC. Constant Volatge design (C.V mode) Active PFC design. Protections: OVP / OCP / SCP / OTP. Work with leading edge and trailing edge TRIAC dimmers. Fully Insulated Case with IP67 rated. Cooling by Free Air Convection (Metal Housing). No-load power consumption < 0.5W at 230VAC. Suitable for LED strip, signage, light box and neon flex. High Efficiency up to 90% 5 years warranty

Message

Spec Sheet

Product Specification

	Model No.	LD120D-VE1K012-70	LD120D-VE50024-70	LD120D-VE33336-70	LD120D-VE25048-70
Output	DC Voltage Range	12V	24V	36V	48V
	Rated Current	10A	5A	3.33A	2.5A
	Rated Max. Power	120W	120W	119.9W	120W
	Ripple & Noise(Max.)note.2	200mV	350mV	400mV	500mV
	Efficiency (Typ.)note.1	90%	90%	90%	90%
	Voltage Tolerance note.3	± 5%	± 5%	± 5%	± 5%
	Dimming Range	3%~100%
	Minimum Load	50W
	PWM Dimming	> 1600Hz
	Set up Time (Max.)	0.5S / 230VAC at full load
Input	Rated Voltage	220~240VAC
	Voltage Range	200~264VAC
	Frequency Range	50/60Hz
	AC Current (Typ.)	0.8A at 230VAC
	Power Factor	> 0.94 at 230VAC with full load.
	Inrush Current (Typ.)	Cold Start 40A (Td=800us measured at 50% Ipeak) at 230VAC
	Max. Number of PSUs on Circuit Breaker	B type : 2 unit (10A) / 3 units (16A) / 5 units (25A),
		C type : 3 units (10A) / 6 units (16A) / 9 units (25A),
		D type : 12 units (16A) / 18 units (25A) at 230VAC
	Leakage Current(Typ.)	<1mA / 230VAC
	No-load power consumption	< 0.5W at 230VAC (0.45W Typ.)
Protections	Over Voltage	13V~19V	26V~38V	38V~50V	50V~65V
		Type:Hiccup mode (Auto recover after fault condition disappeared).
	Over Current	105~180% rated current, Type: Latch Off(re-power on to recover).
	Over Temperature	95°C±10%,Type: Latch Off (re-power on to recover).
	Short Circuit	Type: Latch Off(re-power on to recover).
Environment	Operation Temp.	-30°C ~ 50°C (Refer to output load derating curve)
	Operation Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.	-40 ~ +80°C
	Storage Humidity	10% ~ 90% RH
	Vibration	10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X,Y, Z axes.
http://www.esop-power.com Ever Shining Optotech Co., Ltd		Update Time:2022.05.25_A1

70 series
Safety &EMC	Safety Standards	meet EN61347-1,EN61347-2-13, independent. ,IP67 Approved.
	Withstand Voltage	I/P - O/P : 3.75K VAC I/P -FG:1.88KVAC O/P -FG:0.5KVAC
	Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms / 500VDC at 25°C
	EMI Conduction & Radiation	Compliance to EN55015
	Harmonic Current	Compliance to EN61000 -3 -2 Class C(100% load), EN61000 -3 -3
	EMS Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547
Others	MTBF	100K hours min. @Ta=25°C
Others	Dimension (L x W x H)	250 x 80.3 x 33.5mm; 930g/pcs
Note: 1. All parameters NOT specially mentioned are measured at230V/50HZ AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with0.1uf & 47uf parallel capacitorat 100% duty output 3. Voltage Tolerance: includes line regulation, load regulation and set-up tolerance. 4. The power supply is considered a component which will beinstalled a final equipment.The final equipment must be re -confirmed that it still meets EMC directives.

Key words:

120W AC-DC Constant Voltage LED Driver with Triac Dimming

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible