Home

96W Constant Voltage LED Driver with Triac Dimming

Classification:

Universal Input range from 108 to132 VAC Constant Voltage design (C .V mode) For forward phase, magnetic low voltage and triac dimmers. Fully Potted suitable for dry and damp location applications. Protections : Over current / Short Circuit /Over Voltage/Over Temperature 3 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD096D-VA40024-19A	LD096D-VA40024-19AX
Output	DC Voltage Range	24V	24V
	Rated Current	4000mA	4000mA
	Rated Max. Power	96W	96W
	Dimming Range	1%-100%	1%-100%
	Voltage Tolerance	±5%	±5%
	Ripple & Noise (Max.) note.2	2.6Vp-p	2.6Vp-p
	Efficiency note.1 full load	>81%	>81%
	Set up Time (Max)	0.5S / 230Vac at full load
Input	Rated Voltage	108-132VAC
	Frequency Range	50/60Hz
	AC Current (Max.)	1.5A at 120Vac
	Power Factor	> 0.5 at 230Vac with full load.
	Inrush Current (Max.)	≤ 60A at 230Vac
	Leakage Current	< 1mA / 230Vac
Protections	Over Voltage	105 % - 120 % Output voltage limiting, auto-recovery
	Over Current	110% - 130% Constant current limiting, auto-recovery
	Over Temperature	110oC - 120oC Temperature limiting, auto-recovery
	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed
Environment	Operation Temp.	-10oC ~ 50oC (Refer to output load derating curve)
	Operation Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.	-20oC ~ +80oC
	Storage Humidity	10% ~ 90% RH
Safety & EMC	Safety Standards	meet UL8750 Class P refer UL1012
	Withstand Voltage	I/P - O/P:1.25K VAC
	Isolation Resistance	I/P-O/P:100M ohms / 500VDC at 25oC
	EMC Standards note.3	meet FCC PART15 CLASSB
Connection	Input	UL #18 3G0.75mm2 (250mm)
	Output	UL #18 2G0.75mm2 (250mm)
Others	MTBF	100K hours min. @Ta=25oC
	Dimension (LWH)	225x68x40mm(19A) 375x78x46 mm(19AX)
	Packing (LWH) / Carton	540x240x174mm; 18pcs/18.5kg(19A) 420x310x190mm; 9pcs/18kg(19AX)
http://www.esop-power.com Ever Shining Optotech Co., Ltd		Update Time:2021.11.26_A0

19A series

Cautions

1. All parameters NOT specially mentioned are measured at 230V/50HZ AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor.

3. The power supply is considered a component which will be installed a final equipment.The final equipment must be re-confirmed that it still meets EMC directives.

Key words:

96W Constant Voltage LED Driver with Triac Dimming

100W Constant Voltage LED Driver with Triac Dimming

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible