Home

60W / 75W Constant Voltage LED Driver with Triac Dimming

Classification:

Input range from 108 to132 VAC Constant Voltage design (C .V mode) For forward phase, magnetic low voltage and triac dimmers. Fully Potted suitable for dry and damp location applications. Protections : Over current / Short Circuit /Over Voltage/Over Temperature 3 years warranty.

Message

Spec Sheet

Product Specification

Model No.		LD060D-VA50012-M40	LD075D-VA32024-M40	LD060D-VA50012-M40X	LD075D-VA32024-M40X
Output	DC Voltage Range	12V	24V	12V	24V
	Rated Current	5000mA	3200mA	5000mA	3200mA
	Rated Max. Power	60W	75W	60W	75W
	Dimming Range	1%-100%	5%-100%	1%-100%	5%-100%
	Voltage Tolerance	5%	5%	5%	5%
	Ripple & Noise (Max.) note.2	1.2 Vp-p	2.6 Vp-p	1.2 Vp-p	2.6 Vp-p
	Efficiency note.1 full load	>83%	>83%	>83%	>83%
	Set up Time (Max)	0.5S / 120Vac at full load
Input	Rated Voltage	108 - 132VAC
	Frequency Range	50/60Hz
	AC Current (Max.)	1.3A at 120Vac
	Power Factor	> 0.5 at 120Vac with full load.
	Inrush Current (Max.)	≤ 60A at 120Vac
	Leakage Current	< 1mA / 120Vac
Protections	Over Voltage	105 % - 120 % Output voltage limiting, auto-recovery
	Over Current	110% - 130% Constant current limiting, auto-recovery
	Over Temperature	110℃ - 120℃ Temperature limiting, auto-recovery
	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed
Environment	Operation Temp.	-10℃ ~ 50℃ (Refer to output load derating curve)
	Operation Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.	-20℃ ~ +80℃
	Storage Humidity	10% ~ 90% RH
Safety & EMC	Safety Standards	meet UL8750 refer UL1310
	Withstand Voltage	I/P - O/P : 1.25K VAC
	Isolation Resistance	I/P-O/P : 100M ohms / 500VDC at 25℃
	EMC Standards note.3	meet FCC PART15 CLASSB
Connection	Input	UL rated, 18 AWGx 2 C( 150 mm)
	Output	UL rated, 18 AWGx 2 C( 150 mm) ，（Vo+, Vo-,)
Others	MTBF	100K hours min. @Ta=25℃
	Dimension (LWH)	137.5 * 47 * 32 mm (M40 only); 303 * 62 * 39 mm (M40X only)
	Packing (LWH) / Carton	340 * 305 * 200 mm; 50pcs/ 19.3 Kg (M40 only)
Note	1. All parameters NOT specially mentioned are measured at 120V/60HZ AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. 3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives.

Key words:

60W / 75W Constant Voltage LED Driver with Triac Dimming

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible