Home

68W AC-DC Constant Voltage LED Driver with 0/1-10V Dimming

Classification:

Universal Input range from 100 to 277VAC, 50/60Hz Class 2 Power Supply Unit Constant Voltage Output Built in 2 Stage PFC Function Function options: 3 in 1 dimming Protections: OVP/OCP/SCP Cooling by Free Air Convention 3 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD068H-VU50012-Q68P	LD068H-VU28024-Q68P	LD068H-VU18836-Q68P	LD068H-VU14048-Q68P
Output	DC Voltage	12V	24V	36V	48V
	Current Range	0-5A	0-2.8A	0- 1.88A	0- 1.4A
	Rated Max. Power	60W	68W	68W	68W
	Voltage Tolerance	±5%	±5%	±5%	±5%
	Efficiency note	> 82%	> 85%	> 85%	> 85%
	Ripple & Noise (Max.) note	360mVp-p @ 100% duty	720mVp-p @ 100% duty	860mVp-p @ 100% duty	960mVp-p@ 100% duty
	DC Dimming	0- 10V
	Resistance Dimming	0KΩ- 100KΩ
	PWM Dimming	Pules: High= 10V Low=0; Duty:0%~ 100%; Fsw 0.4-2KHz
	Set up time (Max.)	0.5 S @ 230Vac & full load
Input	Voltage & Frequency Range	100-277Vac; 50/60Hz
	AC Current (Max.)	0.75A @ 115Vac / 0.40A @ 230Vac
	Power Factor	>0.94 @ 230Vac / 50Hz & full load
	Total Harmonic Distortion	<20%
	Inrush Current (Max.)	80A @t 230Vac
	Leakage Current	<1mA / 240Vac
Protections	Over Current	110% - 150% Constant current limiting, Type: auto-recovery
	Short Circuit	Hiccup mode, Recovers automatically after fault condition is removed
	Over Voltage	110%- 150% rated output Voltage
		Type: Latch OFF Mode. (Re-power on to recover)
Environment	Working Temp.	-20℃~50℃ (Refer to output load derating curve) 230V/50Hz
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp., Humidity	-40 ~ +80℃ , 10% ~ 90% RH
Safety& EMC	Safety Standards	Meet EN61347- 1, EN61347-2- 13
	EMI Standard	Meet EN55015, CISPR15
	EMS Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547
	Withstand Voltage	I/P - O/P: 3.75KV AC
	Isolation Resistance	I/P-O/P:100M ohms / 500VDC @ 25℃
Connection	Input	UL rated 18AWG X 2C ( 150 mm)
	Output	UL rated 18AWG X 2C ( 150 mm)
	Output (Dimming Signal)	UL rated 20AWG x 2C ( 150mm) See Wire Diagram
Others	MTBF	100K hours min. @Ta=25℃
	Dimension(LWH)	139.6 * 48.6 * 32mm
	Packing(LWH)/Carton
Note 1. All parameters NOT specially mentioned are measured at 230V/50Hz AC input and rated load @ 25 °C ambient temperature. 2.Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0. 1uF & 47uF paralleled capacitor. 3. The power supply as a component which will be installed in a final equipment, and the EMI performance must be re-confirmed.

Key words:

68W AC-DC Constant Voltage LED Driver with 0/1-10V Dimming

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible