Home

150WAC-DC Constant Voltage LED Driver

Classification:

Constant Voltage design Universal AC input /range (up to 264 VAC) Fully encapsulated with IP67 level(Note.8) Protections: OLP/SCP/OTP/OVP No Load Consumption<0.5W at 230Vac 100% full load burn-in test Suitable for LED lighting and moving sign applications(Note.7) 3 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD120L-VE1K12-59	LD150L-VE62524-59
OUTPUT	DC Voltage	12V	24V
	Rated Current	10A	6.25A
	Current Range	0~10A	0~6.25A
	Rated Power	120W	150W
	Ripple & Noise(Max.) Note.2	150mVp-p	150mVp-p
	Voltage Tolerance Note.3	± 5%
	Line Regulation	± 1%
	Load Regulation	± 2%
	Setup,Rise Time Note.6	500ms,50ms/230Vac
	Hold Up Time(Typ.)	18ms/230Vac
INPUT	Voltage Range Note.4	220-240VAC
	Frequency Range	47-63Hz
	Efficiency(Typ.)	87%	89%
	AC Current(Max)	1.6A at 230Vac
	Inrush Current(Max)	Cold Start 80A at 180Vac
	Leakage Current	0.25mA / 240Vac
Protections	Over Load	110 % - 150 % rated output power
		Protection Type: Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	13.5-18V	27-35V
		Protection Type: Shutdown o/p voltage, re-power on to recover
	Over Tempearture	Protection Type: Shutdown o/p voltage, re-power on to recover after temperature goses down
Environment	Working Temp.	-20 ℃~ 60℃(Refer to "Derating Curve")
	Working Humidity	20% ~ 90% RH non-condensing.
	Storage Temp.,Humidity	-20 ~ +80℃ ,10% ~ 95% RH
Safety & EMC	Safety Standards	EN61347 -1:2015, EN61347 -2 -13:2014/A1:2017
	Withstand Voltage	I/P - O/P: 3.75K VAC
	Isolation Resistance	I/P - O/P:>100M Ohms /500Vdc / 25℃ /70% RH
	EMC Emission	meet EN55015:2013+A1:2015
	EMC Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547:2009, EN61000 -3 -2 EN61000 -3 -3 Class Ⅱ
Connection	Input	UL rated, 1015 18 AWGx 2 C(150mm)
	Output	UL rated, 1015 14 AWGx 2 C(150mm)
Others	MTBF	100K hours min. MIL -HDBK -217F(25°C)
	Dimension(LWH)	205 * 63 * 38mm
	Packing(LWH)/Carton	54 * 24 * 17.4cm; 18pcs/ 15Kg
Note	1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature. 2. Ripple & Noise are measured at 20MHZ of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf paraliel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Dlrective on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure.

Key words:

150WAC-DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible