+
  • 100W-70DA series.jpg

100W AC-DC Constant Voltage LED Driver

Classification:

Universal AC input range 90~305VAC Constant Voltage Operation Buit-in Active PFC Function Protections:OVP/OCP/SCP/OTP High Efficiency 93% Fully Insulated Case with IP67 Level Cooling by Free Air Convection(Metal Housing) No Load Consumption<0.5W at 230Vac Suitable for LED Strips and Moving Sign Applications Function options:3 in 1 dimming(dim-to-off);DALI Note:LD100H-VUyyynn-70(X): yyy=Rated Current,nn=DC Voltage, (X)=Blank→Non DIM.,(X)=D→3-in-1 DIM.,(X)=DA→DALI DIM. The output and dimming lines are compliant with the new regulations with isolation.


Product Specification


Specification

 

 

 

 

 

OUTPUT

DC Voltage

12V

24V

36V

48V

Rated Current

8.3A

4.2A

2.8A

2.1A

Current Range

0~8.3A

0~4.2A

0~2.8A

0~2.1A

Rated Power

99.6W

100.8W

100.8W

100.8W

Ripple&Noise(Max.)Note.2

300mVp-p

350mVp-p

400mVp-F

500mVp-p

Efficiency at 230VAC(Typ.)

93%

93%

93%

93%

Voltage Tolerance Note.3

±5%

±5%

±5%

±5%

PWM Dimming (optional)

>1600 Hz (for dimmable version)

Setup Time (Max.)Note.6

0.5s/230VAC,1s/115VAC,at full load

 

 

 

 

INPUT

Rated Voltage Note.4

100~277VAC

Voltage Range

90~305VAC

Frequency Range

47-63Hz

AC Current(Max)

1.5A at 115VAC/0.6A at 230VAC

Power Factor

>0.98 at 115VAC/>0.94 at 230VAC at full load.PF=0.9 at 70%load

Total Harmonic Distortion

THD<15%at 230VAC,full load Note 9.

Inrush Current(Max)

Cold Start 60A at 230VAC

Leakage Current

<1mA/240Vac

DIM.Control (3 in 1)

DC dimming

DC 0-10V

PWM dimming

Puls:Hi=10V Low=0V,Duty:0%~100%,Fsw 0.5-3KHz

Resistance dimming

0KQ~100KQ or Electronic Potentiometer 0-10V

DIM.Control

(DALI)

DALI Standards

Compatibility with IEC 62386-101,102 and 207

DALI bus current consumption

<2mA

 

 

 

 

Protections

Over Current

105%-180%rated output power

Type:Auto recover after fault condition disappeared

Short Circuit

Type:Hiccup mode &recovers after fault condition disappeared.

Over Voltage

13~19V

26~38V

38V~50V

50V~65V

Type:Hiccup mode (re-power on to recover).

Over Temperature

Tcase:95°℃±10%

Type:Shutdown mode (re-power on to recover).

http://www.esop-power.com

Ever  Shining  Optotech  Co.,Ltd

Update Time:2021.06.01_A0

 

 

 

70 series

Model No.

LD100H-VU83012-70(X)   LD100H-VU42024-70(X)    LD100H-VU28036-70(X)    LD100H-VU21048-70(X)

 

 

Environment

Working Temp

-30℃~50℃(Refer to "Derating Curve")

Working Humidity

20%~90%RH non-condensing.

Storage Temp.,Humidity

-40~+80℃,10%~90%RH

Vibration

10~500 Hz,2G 10 min./1 cycle,period for 60 min.each along X,Y,Z axes.

 

 

 

Safety&EMC

Safety Standards

EN61347-1,EN61347-2-13,independent,IP67 Approved

Withstand Voltage

I/P-O/P:3.75KVACI/P-FG:1.88KVAC  O/P-FG:0.5KVAC

Isolation Resistance

l/P-O/P,I/P-FG,O/P-FG:100M ohms /500VDC at 25°C

FMC.Emission

Compliance to EN55015,FCC part 15

Harmonic Current

Compliance to EN61000-3-2 Class C(=75%load),EN61000-3-3

EMS Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547,criteria B

Others

MTBF

120K hours min.  MIL-HDBK-217F(25°C)

Dimension(L*W*H)

230x 80.3×33.5mm;840g/pcs

1.All parameters NOT specially mentioned are measured at 230V AC input,rated load and 25°C ambient temperature.

Note          2.Ripple &Noise are measured at 20MHZ of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf &47uf parallel

capacitor

3.Tolerance:includes set up tolerance,line regulation and load regulation.

4.Derating may be needed under low input voltage.Please check the static characteristics for more details

5.The power supply is considered as a component that will be operated in combination with final equipment.Since EMC

performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installation again

6.Length of set up time is measured at first cold start.Turning ON/OFF the power supply may lead to increase of the set up time.

7.The unit might not be suitable for lighting applications in EU countries.Please check with your local authorities for the possible

use of the unit.

8.Suitable for indoor use or outdoor use without direct sunlight exposure

9.THD<25%at 264VAC,full load

Key words:

100W AC-DC Constant Voltage LED Driver

Previous Page

Next Page

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible