Home

150W AC-DC Constant Voltage LED Driver

Classification:

Universal AC Input Range 90 ~ 264VAC. Constant Voltage mode. Active PFC design. Protections: OVP / OCP / SCP / OTP. High Efficiency up to 91.5 % Fully Insulated Plastic Case. Meet application for ErP (EU) 2019/2020 No-load power consumption < 0.5W at 230VAC Set up time < 0.5S at 230VAC. Suitable for LED strips and Moving Sign applications. Withstand 300VAC Surge Input for 5 Seconds.

Message

Spec Sheet

Product Specification

Model No.			LD150H-VU11012-58T	LD150H-VU62524-58T	LD150H-VU42036-58T	LD150H-VU31548-58T
Output	DC Voltage		12V	24V	36V	48V
	Rated Current	200~264VAC	0~11.0A	0~6.25A	0~4.2A	0~3.15A
		100~180VAC	0~10.0A	0~5.0A	0~3.35A	0~2.5A
	Rated Power	200~264VAC	132W	150W	151.2W	151.2W
		100~180VAC	120W	120W	120.6W	120W
	Ripple &Noise (Max.)		200mV	200mV	360mV	480mV
	Efficiency at 230VAC (Typ.)		89%	91%	91%	91.5%
	Voltage Tolerance		± 5%	± 5%	± 5%	± 5%
	Set up time (Max.)		=0.5S at 230VAC, full load.
Input	Rated Voltage		100 ~ 240VAC
	Voltage Range		90 ~ 264VAC
	Frequency Range		47 Hz ~ 63 Hz
	AC Current (Max.)		1.3A at 115VAC / 0.8A at 230VAC
	Power Factor		>0.98 at 115VAC / >0.95 at 230VAC, full load.
	Total Harmonic Distortion		THD < 10% at 230VAC, full load
	Inrush Current (Typ.)		Cold Start 55A (Td=630us measured at 50% Ipeak) at 230VAC
	Max. Number of PSUs on Circuit Breaker		B type : 2 units (10A) / 3 units (16A) / 5 units (25A), C type : 3 units (10A) / 5 units (16A) / 9 units (25A), D type : 11 units (16A) / 18 units (25A) at 230VAC
	Leakage Current		<1mA at 240VAC
	No-load power consumption		< 0.5W at 230VAC (0.3W Typ.)
Protections	Over Current	200~264VAC	110%~150%	110%~150%	110%~150%	110%~150%
		100~180VAC	130%~185%	130%~185%	130%~185%	130%~185%
			Type: Hiccup mode (Auto recover after fault condition disappeared).$0
	Short Circuit		Type: Hiccup mode (Auto recover after fault condition disappeared).
	Over Voltage		13.2V~18V	26.4V~36V	39.6V~54V	52.8V~72V
			Type: Hiccup mode (Auto recover after fault condition disappeared).
	Over Temperature		Tcase: 90°C ± 10°C
			Type: Shutdown output , recovers automatically after temperature goes down.
Environment	Operation Temp.		-20°C ~50°C (Refer to output load derating curve).
	Operation Humidity		20% ~ 90% RH non-condensing.
	Storage Temp.		-40 ~ +80°C
	Storage Humidity		10% ~ 90% RH
	Vibration		10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes.

Safety & EMC	Safety Standards	EN61347- 1, EN61347-2- 13, independent.
	Withstand Voltage	I/P -O/P: 3.75KVAC
	Isolation Resistance	I/P -O/P :100M ohms / 500V DC at 25°C
	EMI Conduction & Radiation	Compliance to EN55015
	Harmonic Current	Compliance to EN61000 -3 -2 Class C(100% load), EN61000 -3 -3
	EMS Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, criteria B
Others	MTBF	100K hours min. MIL-HDBK-217F(25°C)
Others	Dimension(L x W x H)	204 x 53.5 x 30mm; 540 g/pcs
Note	1.All specifications not specially mentioned are measured at 230VAC full load and 25°C ambient temperature. 2.Ripple & Noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with 0.1uf & 47uf parallel capacitor. 3.Voltage Tolerance: includes line regulation, load regulation and set-up tolerance. 4.The power supply is considered a component which will be installed a final equipment. The final equipment must be re -confirmed that it still meets EMC directives.

Key words:

150W AC-DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible