Home

100W AC-DC Constant Voltage LED Driver

Classification:

AC input range from 90 to 264Vac Constant voltage mode Active PFC design No-load power consumption <0.5Wat 230Vac Set up time < 0.5S at 230Vac Compliant with ErP (EU) 2019/2020 Compliant with CE certiﬁcate by LED driver product segment Safety protections include OCP/SCP/OVP/OTP 3 years warranty

Message

Spec Sheet

Product Specification

Model No.		LD100H-VU83012-58T	LD100H-VU42024-58T	LD100H-VU28036-58T	LD100H-VU21048-58T
Output	DC Voltage	12V	24V	36V	48V
	Current Range	0~8.30A	0~4.20A	0~2.80A	0~2. 10A
	Rated Power	99.6W	100.8W	100.8W	100.8W
	Voltage Tolerance	±5%	±5%	±5%	±5%
	Ripple & Noise (Max. full load) note.2	0.20Vp-p	0.20Vp-p	0.36Vp-p	0.48Vp-p
	Efficiency note . 1 full load(230V/50HZ)	≥88%	≥ 90%	≥90%	≥90%
	Max Input Power@ No Load	<0.5W@Vin_ac=230V
	Setup Time	≤500mS @ 230Vac & Full load
	Hold up Time (Typ.)	20mS @ 230Vac & Full load
Input	Voltage Range	100 - 240Vac
	Frequency Range	50/ 60 Hz
	AC Current (Max.)	1. 1A at 115Vac ; 0.52A at 230Vac
	Power Factor	> 0.95 at 230Vac with full load.
	Inrush Current (Max.)	75A at 230Vac
	Leakage Current	< 1mA/ 240Vac
Protections	Over Current	110% - 150% Rated max output current.
	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed
	Over Temperature	Shut down output, recovers automatically after temperature goes down.
	Over Voltage	110% - 150% Rated output voltage
Environment	Operating Temp.	-20℃ ~ 50℃ (Refer to output load derating curve)
	Operating Humidity	20% ~ 90% RH non-condensing.
	Storage Temp & Humidity	-40 ~ +80℃ , 10% ~ 90% RH
Safety& EMC	Safety Standards	EN61347 -1, EN61347 -2 -13
	Withstand Voltage	I/P - O/P : 3.75KVAC
	Isolation Resistance	I/P - O/P : 100M ohms / 500VDC @25℃
	EMI Conduction & radiation	Meet EN55015
	EMS Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547, EN61000 -3 -2 Class C
Connection	Input	KF128-7.6-2P Screw terminal
	Output	KF128-7.6-2P Screw terminal
Others	MTBF	100K hours min. MIL -HDBK -217F(25℃)
	Dimension(LWH)	204x53.50x30mm
	Packing(LWH)/Carton
Note 1. All parameters NOT specially mentioned are measured at 230V/50Hz AC input, rated load and 25°C ambient temperature. 2.Ripple & Noise are measured at 20MHz bandwidth oscilloscope and with 0. 1uF & 47uF paralleled capacitor. 3. The power supply as a component which will be installed in a final equipment, and the EMI performance must be re-confirmed.

Key words:

100W AC-DC Constant Voltage LED Driver

None

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible