9W AC-DC Constant Current LED Driver with 1-10V Potentionmeter Dimmer
Classification:
Universal AC input /Full range (up to 264 VAC) Constant Current design Class 2 Power Supply Unit Fully isolated plastic case Protections: ■Over current/ ■ Short Circuit / ■ Over Temperature 2 years warranty Dimmer with EC011

Product Specification
|
Model No. |
LD-CU03527-03D |
LD-CU07014-03D |
|
|
Input |
Voltage & Frequency Range |
100 - 240 V AC; 47 Hz ~ 63 Hz |
|
|
|
AC Current (Max.) |
0.2 A at 115Vac/ 0.1A at 230Vac |
|
|
|
Power Factor |
> 0.45 at 115Vac/ >0.4 at 230Vac with full load. |
|
|
|
Inrush Current (Max.) |
20 A at 230 Vac |
|
|
|
Leakage Current |
< 1 mA / 230 Vac |
|
|
Output |
DC Voltage Range |
3 - 27 V |
3 - 14 V |
|
|
Constant Current Range |
350 mA'± 6 % |
700 mA'± 6 % |
|
|
Rated Max. Power |
9 W |
9 W |
|
|
Ripple & Noise(Max.) note.2 |
300mVp-p |
300mVp-p |
|
|
Efficiency note.1 |
82 % |
83 % |
|
Protections |
Over Current |
110 % - 120 % Constant current limiting, auto-recovery |
|
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|
|
Environment |
Working Temp. |
- 10 ℃~ 40 ℃ambient operating at full load (Refer to output load derating curve) |
|
|
|
Working Humidity |
20% ~ 90% RH non-condensing. |
|
|
|
Storage Temp.,Humidity |
-20 ~ +80℃ ,10% ~ 90% RH |
|
|
Safety & EMC |
Safety Standards |
meet EN61347-1,EN61347-2-13 |
|
|
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547 |
|
|
|
Withstand Voltage |
I/P - O/P: 3.75 K VAC |
|
|
|
Isolation Resistance |
I/P-O/P:100M ohms / 500VDC at 25 ℃ |
|
|
Connection |
Input |
3 P screw terminal block (pin2 NC) |
|
|
|
Output |
4 P screw terminal block |
|
|
Others |
MTBF |
100K hours min. @Ta=25 ℃ |
|
|
|
Dimension(L*W*H) |
86 * 45 * 26 mm |
|
|
|
Packing(L*W*H)/Carton |
440 * 320 * 190 mm; 100 pcs/ 8.2 Kg |
|
|
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temper ature. |
||
|
|
2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor. |
||
|
|
3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re ‐confirmed that it still meets EMC directives. |
||
|
|
4. ELV dimmer with 120Vac+/-10% only. |
||
|
Machenial Speciflcation: 86 X 45 X 26 mm
|
Wiring Diagram
|
||
Key words:
9W AC-DC Constant Current LED Driver with 1-10V Potentionmeter Dimmer
Online Message
Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible
Related Products

