+
  • 25W-18D CU series.jpg

25W AC-DC Constant Current LED Driver with 1-10V Dimming

Classification:

Universal AC Input / Full range (up to 264 VAC) ■ Built-in active PFC Function Constant Current design (C .C mode) ■ Dimmer with EC011 / EC013 Fully isolated plastic case Protections : Over Current / Short Circuit 2 years warranty


Product Specification


Model No.

LD-CU7036-18D

 

 

 

Output

DC Voltage Range

9-36V

Rated Current

700mA

Rated Max. Power

25W

Current Tolerance

±6%

Ripple & Noise (Max.) note.2

5.4  Vp-p

Efficiency  note.1

82%

Set up Time (Max)

3S / 230Vac  at full load

 

 

Input

Rated Voltage

100 - 240VAC

Frequency Range

50 / 60Hz

AC Current (Max.)

0.5A at  115Vac  /  0.27A at 230Vac

Power Factor

> 0.4 at 230Vac with full load.

Inrush Current (Max.)

≤ 50A at  230Vac

Leakage Current

< 1mA  /  240Vac

Protections

Over Current

110% - 120% Constant current limiting, auto-recovery

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

 

Environment

Operation Temp.

- 10℃ ~ 50℃ (Refer to output load derating curve)

Operation Humidity

20% ~ 90% RH  non-condensing.

Storage Temp

-20℃ ~ +80℃

Storage Humidity

10% ~ 90% RH

 

Safety

&

EMC

Safety Standards

meet EN61347- 1, EN61347-2- 13

Withstand Voltage

I/P - O/P : 3.75K  VAC

Isolation Resistance

I/P - O/P : 100M ohms / 500VDC at  25℃

EMI Conduction & radiation

meet EN55015

EMS Immunity

meet EN61000-4-2, 3, 4, 5, 6, 11  ;  EN61547

Connection

Input

3P screw terminal block

Output

4P screw terminal block

 

Others

MTBF

100K hours min. @Ta=25℃

Dimension (L*W*H)

171  *  47.5  *  28.5  mm

Packing (L*W*H) / Carton

380  *  300  *  205  mm  ;  50 pcs  /  15.5 kg

 

Note

1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature.

2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0. 1uf & 47uf parallel capacitor.

3. The power supply is considered a component which will be installed a final equipment.

The final equipment must be re -confirmed that it still meets EMC directives.

 

Key words:

25W AC-DC Constant Current LED Driver with 1-10V Dimming

Previous Page

Next Page

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible