+
  • 9-12W-04D CU series(1706255672762).jpg

9-12W AC-DC Constant Current LED Driver with 1-10V Dimming

Classification:

Universal AC Input / Full range (up to 264 VAC) Built-inactive PFC Function Constant Current design (C .C mode) Dimmer with EC011 / EC013 Fully isolated plastic case Protections : Over Current / Short Circuit 2 years warranty


Product Specification


Model No.

LD012H-CU03536-04D

LD009H-CU07012-04D

LD012H-CU07018-04D

 

 

 

Output

DC Voltage Range

15-36V

6-12V

6-18V

 

Rated Current

350mA

700mA

700mA

 

Rated Max. Power

12W

9W

12W

 

Current Tolerance

±6%

±6%

±6%

 

Ripple & Noise (Max.) note.2

5.0  Vp-p

5.0  Vp-p

5.0  Vp-p

 

Efficiency   note.1

75%

75%

75%

 

Set up Time (Max)

3S / 230Vac  at full load

 

 

Input

Rated  Voltage

100 - 240VAC

 

Frequency Range

50 / 60Hz

 

AC Current (Max.)

0.11A at  115Vac  /  0.06A at 230Vac

 

Power Factor

> 0.9 at 230Vac with full load

 

Inrush Current (Max.)

≤ 30A at  230Vac

 

Leakage Current

< 1mA  /  240Vac

Protections

Over Current

100% - 120% Constant current limiting, auto-recovery

 

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

 

Environment

Operation Temp.

-10℃ ~ 50℃ (Refer to output load derating curve)

 

Operation Humidity

20% ~ 90% RH non-condensing.

 

Storage Temp

-20℃ ~ +80℃

 

Storage Humidity

10% ~ 90% RH

 

Safety

&

EMC

Safety Standards

meet EN61347-1, EN61347-2-13

 

Withstand Voltage

I/P - O/P : 3.75K  VAC

 

Isolation Resistance

I/P - O/P : 100M ohms / 500VDC at  25℃

 

EMI Conduction & radiation

meet EN55015

 

EMS Immunity

meet EN61000-4-2, 3, 4, 5, 6, 11  ;  EN61547

Connection

Input

3P screw terminal block

 

Output

4P screw terminal block

 

Others

MTBF

100K hours min. @Ta=25℃

 

Dimension (L*W*H)

141  *  45  *  26  mm

 

Packing (L*W*H) / Carton

540  *  305  *  185  mm    ;   100 pcs  /  18.5 kg

 

Note

1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C ambient temperature.

2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor.

3. The power supply is considered a component which will be installed a final equipment.

The final equipment must be re -confirmed that it still meets EMC directives.

 

Key words:

9-12W AC-DC Constant Current LED Driver with 1-10V Dimming

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible