+
  • i35 Series.JPG

12W Constant Current DALI Dimmable LED Driver

Wide Voltage Input : 100VAC ~ 240VAC 50/60HZ Output : 12W Max / 10-40V,48VDC Max Class 2 level, fully protective plastic housing Built-in active PFC function PF : 0.9 C Short Circuit / Overload / Temperature Protection Suitable for indoor LED lighting application Brand-new intelligent heat-resistant TECH, Effective extend DRIVER Life 3 years warranty


Product Specification


 

Model No.

i35-dali

Output

Current

350mA

 

DC Voltage

10-40V,Max 48V

 

Rated power

12W  PUSH DIM

 

Channels

1

 

Current Accuracy

±3%

 

R & N (Max)

3Vp-p

Input

Voltage Range

100-240VAC

 

Frequency Range

50/60HZ

 

Power Factor(Typ)

PF=0.9

 

Efficiency(Typ)

83%

 

AC Current(Max)

0.15A 100VAC

 

Leakage Current

<1mA/240VAC

 

Inrush current(Typ)

<5A at 230VAC

 

Protects

Short Circuit

Intelligent closed if short circuit / Auto Recover

 

Over Load

Intelligent closed output if current load≥120% / Auto Recover

 

Temperature

Intelligent closed output current if Housing temperature ≥85°C / Auto Recover

Others

Dimension(L x W x H)

76x32x24mm

 

G.W.

86g

 

Working temp.

Ta : 40oC     tc :  95oC

 

Working humidity

20~90% RH

 

Cautions

1.This product should be installed by qualified personnel.

2.This product is non waterproof, need to avoid sun and rain.In case of outdoor use, please ensure it is mounted in

a water proof enclosure.

3.Good heat dissipation conditions extend product life. Please install the product in a well-ventilated environment.

4.Please make sure LED power supply output voltage, current is used to meet the product requirements.

5.Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also

ensure that the cable is secured tightly in the   connector.

6.Due to safety concerns, PVC or rubber cord of 0.75- 1.5mm² is recommended for input and output terminal (excluding

signal terminals). Flat power cord is not suitable.Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

7.In case of malfunction, do not repair it yourself.

Key words:

12W Constant Current DALI Dimmable LED Driver

Online Message

Dear customers, if you have any comments and suggestions on our products or services, please tell us in time, we will give you satisfaction as soon as possible